|
Technical Details (MB7501) |
|
Principal Dimensions and Characteristics |
|
|
Type of Vessel: |
Maintenance Work Boat |
|
|
Classification Society / Class: |
American Bureau of Shipping |
|
|
Class Notation: |
Hull & Machinery for Class ABS Maltese Cross + A1 + AMS Circle E for unrestricted service |
|
|
Condition: |
Work-In-Progress (17 months to completion) |
|
Port of Registry: |
Malaysia |
|
|
Location: |
Malaysia |
|
|
|
Length Over All: |
75.00 m |
|
|
|
Length Between Perpendiculars: |
72.20 m |
|
|
|
Molded Beam: |
20.00 m |
|
|
|
Molded Depth: |
6.50 m |
|
|
|
Designed Draft: |
5.00 m |
|
|
|
Designed Speed: |
11 knots @ 100% MCR |
|
|
Fuel Oil Tank Capacity: |
Approx. 650 m3 |
|
|
Fresh Water Tank Capacity: |
Approx. 1200 m3 |
|
|
Crew Accommodation: |
196 Men |
|
Main Deck Strength |
10 tonnes/m2 |
|
Main Engines |
|
|
Make/Model: (2 units) |
Cummins / KTA50-M2 |
|
|
Power @ 1900 RPM |
1800 BHP x 2 |
|
|
Gear Box |
|
|
Make/Model: (2 units) |
Reinjtes / WAF664 |
|
|
Ratio: 5.04:1 |
|
Generator Sets |
|
|
Make/Model: (3 units) |
Cummins / KTA19-D(M)1 |
|
|
Power Rating: |
360 kW |
|
|
Emergency Generator Set
|
Make/Model: (1 unit) |
Cummins / 6CTA8.3-D(M) |
|
Power Rating: |
150 kW | |
|
Bow Thruster |
|
One (1) 8t transverse FPP thruster. The unit shall be driven by a diesel engine mounted in the fore part of the bow thruster compartment. One (1) remote stations c/w instrument panel and the rpm of the engine will be controlled from both the forward and aft controls in the wheelhouse. |
|
Engine Make/Model: |
Cummins / VTA28-DM |
|
|
Thruster Tunnel Make: |
HRP or KAMOME |
| |
|
Anchor Windlass/Ramp Door Winches |
|
|
One (1) unit electro hydraulic anchor windlass suitable for 46mm dia. Stud link Grade 2 chain c/w two warping drums is to be provided. The cable lifters and warping drums are to be independently clutched and variable speed local hydraulic control on forward of forecastle deck, chain pipes, cable stoppers and hawse pipes are to be arranged at site. Windlass is to be provided with manual brake and clutch with local control.
Maker : Plimsoll
Capacity : 10T at 10m/min
Gypsy size : suitable for 46mm dia. Grade 2 stud link chain
Chain stopper : suitable for 46mm dia. Grade 2 stud link chain
Brake holding load : 49.4mt (static) |
|
Anchors, Chain Cables & Mooring Lines
Anchors : Four (4) Delta flipper anchors, each 5000 kg for mooring &
one (1) spare anchor
Anchor wire : Each anchor to be fitted with 3m pig tail chain. Anchor wires of
1500 m length and 38 mm diameter shall be supplied five (5) in
total, one being spare. Construction to be 6 x 19 RHRL,EIPS,
IWRC GALV
Mooring Lines : 1 x 96 m dia. X 200 m polypropene rope |
|
Single Drum Mooring Winch |
|
Maker (4 units) : Plimsoll
Type : Single drum c/w auto-spooling
Drum Pull (1st Layer) : 40T x 0-10m/min (low speed)
10T x 0-30m/min (high speed)
Drum Capacity : 1500m x 38mm dia. wire rope
Brake Holding : 90T (static)
Horsepower Required : 110 kW (approx.)
Control : Local control stand and central remote control |
|
Hydraulic Vertical Capstan |
|
Quantity : 2 units
Type : Vertically Mounted
Rated Pull : 5T x 0-15 m/min
Horsepower Required : 22 kw (approx.)
Control : Local Control |
|
Lattice Boom Type Offshore Pedestal Crane |
|
Make/Model : Favelle Favco / 6/10K (Full compliance with API
Specification 2C & ABS classification)
Rotating System : |
|
|
|
Share
|
|
